Stretch hood machine

Lachenmeier Stretch Hood Machine H-Single

Condition: ready for operation (used), Year of construction: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Dobvqswg E Aks I Uxskl

Condition: excellent (used), Available: Immediately Dsbvq Iepr Uu Us Uxokl

Condition: excellent (used), A very well-maintained surface grinder, manufactured by G+H, type: FS 40 Primus SA, machine number: 20701189 Magnetic table: 400x200 Dobvq Iewc Skme Uxjkl Magnetic separator and pump for cooling

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system * Dkjbvq Isu Id Awj Uxjl

Condition: used, Year of construction: 1997, Set of devices used in the production of carbonated drinks with the addition of syrups, such as orangeade. The device consists of: 2000 L tanks x 3 pcs Debvq I Uoubykujxekl 2000 L tanks with a mixer x 2 pcs SCHMIDT Sigma MK27 pasteurizer tank with a mixer installation set with control cabinet Model: OST/WEST Q3000l/h Efficiency: 3000 L/h Year of production: 1997 Condition: used

Condition: used, workpiece length 400 mm work piece width 400 mm workpiece height 100 mm total power requirement ? kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,7*0,7*1,6 m No. 5006 Filing machine ERHARDT + SPIESS / H&K Working area: Table 400 x 400 Drive: ? 2 hold-down devices File guide Adjustable stroke rate 75-300 min-1 Space requirement approx. 650 x 650 x (+500) x 1600 mm Debveulnt Tjq I Uxskl Weight approx. 200 kg

Year of construction: 1995, Condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Dobvoipv D Ujq I Uxskl

Year of construction: 1987, Condition: ready for operation (used), Working diameter: 95-150mm, rotational speed: 2250-6000/min. Dkebsmk Tapovq I Uxjl

Condition: excellent (used), Year of construction: 2000, Reda pasteurizator 1800l/H, year built 2000 complete with control cabinet Dkobvq Isq U A Tdo Uxsl

Condition: new, Year of construction: 2022, Functionality: fully functional, Automatic throughput weigher for grain and oilseed, capacity 5t/h, new, never used. Without control cabinet. Dksbvqewbk D No I Uxel

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below. Dkjbvsq Nx E Sjq I Uxel

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt adhesive specification used, good condition make Artech-Biesse type Single year of manufacture 2007 machine no. 91009 CE type-tested edge thickness 0.4 - 3.0 mm workpiece height min 10 max 120 mm Dobjvwgizevq I Uxskl space requirement approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Hamburger forming machine, Sind, NEW Dksbvjhx Nmgsq I Uxol Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Condition: good (used), Cutting capacity in ST 60 M 10 - M 42 --- Motor power 4 kW ,,, Speeds 35 - 185 rpm ,,, Dkebvsunrb Hoq I Uxsl Quill stroke 120 mm ,,, throat depth 300 mm ,,, Machine height 2.3 m Weight 1.2 tons Cartridges for metric threads optional Cartridges for inch threads--- ...

Condition: ready for operation (used), Year of construction: 2007, Number of bending rolls 3, diameter of bending rolls 520mm, driven bending rolls 3, machine weight 12to Djbvsur Tkdsq I Uxjkl

Condition: ready for operation (used), Grinding machine for sharpening gang saw blades. There is also a machine for sharpening circular saw blades (Fig. No.: 35, price 2400), for setting circular saw blades (Fig. No.: 36, price 750) and for rolling gang saw blades (Fig. No.: 37, price 1000). Dkeboimz S Ujvq I Uxel

Condition: new, Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm Djbvq Ishx Enwj Uxokl

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Dkebvqjwc Tdue I Uxol Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Djbvqsv Rpr Ss I Uxekl Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors. Dkobjvz Edrsvq I Uxsl

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Dkjbvqowhr I Ne I Uxsl Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm Djbvqswhf Hfj I Uxokl 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln Dkobjwhbgzjvq I Uxol -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0-200-24-1105, total length: 10,825 mm, edge thickness (max.): 20 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 310/7/A20 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2010 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL84, 2 motors, with straight/chamfer cutting function - Pre-milling (rough trimming) 1,15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with several exchangeable trimming heads - Profile (radius-) scraping with exchangeable tool heads - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Buffing unit top/bottom ELECTRONIC CONTROL: - powerControl PC 22 OPERATING SYSTEM - woodCommander ANNOTATION (1): Djbvqowh T Rrj I Uxskl The machine has been partially reconditioned and serviced in June 2014. Top pressure belt and glue roller drive are new, glue application unit has been completely reconditioned and freshly teflon-coated, guillotine all new seals, guides and new knives, edge transport rollers new, wear & tear parts in snipping, corner rounding, scraping and buffing units are new ANNOTATION (2): Included in scope of delivery are: - 1 additional glue application unit (teflon-coated) - Glue unit service station ANNOTATION (3): The return conveyor system (LIGMATECH) as it can be seen in the pictures is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 12,750 h, General Data Measurements width 2300 mm Measurements depth 2600 mm Measurements height 1400 mm Machine weight 4450 kg Control Unit Brand ENGEL Model CC300 Injection Unit Screw diameter 15 mm Clamping Unit Clamping force 350 kN Opening stroke 400 mm Max open daylight 590 mm Mould height min 190 mm Size of mold platens 780 x 400 mm Ejector stroke 100 mm Ejector force for / back 20.1 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available. Debjwg Ic Tjvq I Uxekl Application Types Injection Moulding