Universal milling machine

Mikron WF 2/3 DP

Condition: good (used), 1 used tool milling machine Micron brand Cjlqxpljv N Dzfj Rsgt Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table Cslqxpljlnfgge Rsgt (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW Cjlocxxq Doqxpl Rogt weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1982, x-travel 400 mm Cslsu U Saboqxpl Rogt y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Cgelqerywgzsxpl Rot made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), Technical specifications: Cgelqorc A Uqoxpl Ret Travel X/Y/Z: 400 x 400 x 375 mm Max. clamping area: 350 x 800 mm Speed range: (12) 50 - 2240 rpm Feed, continuously variable: 1 - 630 mm/min Rapid traverse, max.: 1.4 m/min Total power consumption: 4.7 kW Dimensions (L x W x H), approx.: 1300 x 1215 x 1700 mm Weight, approx.: 1250 kg Equipment: - Digital display - Rigid angle table - Coolant system - Machine lamp

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Cooling device Cgelqjcmzzgjxpl Rst Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT Celqxouhbxaopl Rogt - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min Cgelqxplstv Ia Te Rst feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 1991, x-travel 560 mm y-travel 500 mm z-travel 400 mm control Heidenhain TNC 114 Aktiv turning speed range 40 - 4000 U/min spindle drive, 2-steps 3,3 / 4 kW total power requirement 9 kW Cjlqxju Rur Uopl Rsgt weight of the machine ca. 2,3 t dimensions of the machine ca. 2,3 x 2,3 x 2,1 m

Condition: excellent (used), Heidenhain Active - Digital display Cjljgvzrveqxpl Rsgt Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: used, Year of construction: 1980, surface area 700 * 250 mm Celqxpouynlaol Rogt no. of flutes 5 groove width 12 mm total power requirement 0 kW weight of the machine ca. 75 kg dimensions of the machine ca. 700*250*320 mm

Condition: used, Year of construction: 1990, surface area 805 * 405 (x 340 ) mm no. of flutes 8 groove width 12 / x 45 mm total power requirement 0 kW weight of the machine ca. 160 kg Celqxpljunuxhj Rjgt dimensions of the machine ca. ? m

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Cgslswd N S Doqxpl Rot -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 155, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Cgjlqxpspcf D Iel Rjt

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 400 x 400 [mm] - Tool type : ISO40 - Spindle speeds : 31.5 - 3500 [rpm] - Spindle power : 6.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2900 x 2650 [mm] - Machine height : 2000 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Heidenhain TNC 155 - Milling vice Cslqxsvxw Auspl Rjgt

Condition: used, Empty weight: 2.000 kg Dimensions (LxBxH): 245 x 210 x 186 cm - Documentation available: Yes - Control: CNC - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cslovtlx Hoqxpl Regt Bram van Summeren

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Cgjlqxpotqqplol Rot Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: excellent (used), Year of construction: 1990, A Mikron WF31 in very good condition. No heavy machining was carried out on the machine. The machine was used for rework and adjustment work in our own mold and tool making business and for the production of small parts. Cgjlqxpov Icq Asl Rst The machine comes from a first-hand source, is flawless and ready for immediate use. Year of manufacture: 1990 Table size: 900 x 530 mm Control: Heidenhain TNC 355 Tool holder: ISO 40 / M 16 Speed range: 40 - 4000 rpm Machine under power: 57,765 hours Travel paths: x-path: 560 mm y-path: 500 mm z-path: 400 mm Feed rates x/y/z - infinitely variable: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m Accessories: 3D probe, 20 holders, splash guard cabin, coolant pump, work light, handwheel, machine documents.

Condition: good (used), MIKRON A21/2 gear hobbing machine -Complete technical data see photos Cgelqxju Sz Aaspl Rot -Change gears -Mitutoyo magnifying glass -Original operating instructions complete -many spare parts -Very well maintained general condition dimensions LxWxH 1,2x1x1,6 meter / weight 1000Kg Errors / input errors excepted

Year of construction: 1988, Condition: ready for operation (used), Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Colqxpljv Sct So Rjgt

Condition: used, Year of construction: 1983, Functionality: fully functional, Control: Heidenhain TNC 145 (operating manual included) Travel (X/Y/Z): 600 / 600 / 500 Cgolqxjv R T Tgepl Ret

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, table width: 750 mm, table length: 425 mm, TECHNICAL DETAILS Feed in longitudinal direction (X-axis): 560 mm Feed in transverse direction (Y-axis): 500 mm Feed in vertical direction (Z-axis): 400 mm Table dimensions: 750 x 425 mm Control: Heidenhain Drill head Drill head holder: ISO40 Speeds: max. 4,000 rpm MACHINE DETAILS Length (L-R): 2,430 mm Depth (V-H): 2,100 mm Height: 1,855 mm Cgelqxplsu U Dyae Ret Weight: 2 tons

Condition: used, Year of construction: 1990, x-travel 560 mm y-travel 500 mm z-travel 400 mm total power requirement 7,5 kW Cgjlsvzh Rnsqxpl Rjt weight of the machine ca. 2,3 t dimensions of the machine ca. 2,2*2,2*2,2 m

Condition: used, Year of construction: 1990, x-travel 560 mm y-travel 500 mm z-travel 400 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,5 x 2,5 x 2,2 m No. 4614 Mikron WF 31 SA Universal tool milling machine Working area: 560 x 500 x 400 Control: Heidenhain TNC 114 - active digital display Cgolqstqp Ekexpl Ret Rigid angular table Spindle holder SK 40 Coolant device Speed range 40 - 4000 rpm Weight approx. 2450 kg